Trotec T500 Bedienungsanleitung Seite 42

To select the desired function which is now flashing, confirm using
. A confirmed function is shown steadily on the display. The func-
tion parameters are set using
ing .
If you do not wish to select a function, exit the lower menu by
entering . If no entry is made, the menu is exited automatically
after 10 seconds.
SENS: Sens enables the sensor mode to be set.
After selecting "Sens" the word "Mode" appears
in the upper display and the mode which is currently
set appears in the lower display line. Select "Mode
100" for building material moisture measurement
B - 9
and ; the entry is confirmed us-
Operating manual – English
and "Mode 120" for wood moisture measurement.
MAT: Mat is used to select the type of wood. After
selecting "Mat", "Code" appears in the upper dis-
play and the wood type code which is currently set
appears in the lower display line. The menu item
"Mat" can only be selected if sensor mode 120
(wood moisture in accordance with the resistance principle) was set
beforehand. A selection of corresponding wood type codes can be
found in the wood type directory included.
TEMP: Temp serves to set the temperature compensation for
wood moisture measurement. The menu item "Temp" can only be
selected if sensor mode 120 (wood moisture in accordance with the