Cleaning And Maintenance; Environmental Information - Power Craft 55999 Gebrauchsanweisung

INSTRUCTION MANUAL
Fitting sanding disc
• Select sandpaper with the appropriate grain
size for the task. Use coarse grain for rough
sanding and fine grain for fine sanding. A
smooth sole (no holes) is also supplied for
buffing.
• Position disc with holes aligned with those on
sanding pad (3).
• Press disc onto Velcro surface and check it is
secure.
USE
• Remove vacuum extractor nozzle cover (6) if
connecting a vacuum cleaner.
• Hold with both hands on the handle, and
switch on at on/off switch (1).
• Apply the sander to the item. Give it time to
work. It is rarely necessary to press the pad
hard against the surface to be worked.
• Avoid blocking the ventilation slots (2) with
your hand, as this may cause the sander to
overheat.
• Switch off using on/off switch when finished.
ENGLISH

Cleaning and maintenance

• Wipe the multisander using a well-wrung cloth
after use, and always keep the surface and
ventilation holes free of dirt.
• Never use corrosive or abrasive detergents, as
they may affect the plastic parts on the
multisander.

Environmental information

You can help protect the environment!
Follow the applicable environmental
regulations: Dispose of unwanted
electrical equipment at an approved
refuse disposal centre.
Take out the batteries before scrapping the
product.
17