Care And Cleaning; Cleaning Agents - Junker JH13AA.0 Serie Gebrauchsanleitung

Use the temperature selector to set the temperature or the
2.
grill setting.
The oven heats up.

Care and cleaning

With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
34
Switching off the appliance
Turn the function selector back to
1.
Turn the temperature selector back to
2.
Open the appliance door carefully and take the cooked food
3.
out.
Note:
To prevent moisture from forming on the control panel, do not
leave the cooked food in the appliance.
Saving energy
You can switch off the appliance before the end of the cooking
time to save energy:
Before the end of the cooking time, turn the temperature
1.
selector back to the position.
Ú
When you want to take the cooked food out of the oven, you
2.
must first turn the function selector to the
Changing the settings
You can change the type of heating, temperature and grill
setting as required.
Wipe the appliance with plenty of water and
Stainless steel
some washing-up liquid. Always wipe parallel
fronts
to the natural grain. Otherwise, you may
scratch the surface. Dry with a soft cloth.
Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately. Do
not use any abrasive materials, scouring
sponges or rough cleaning cloths. The stain-
less steel fronts can be polished using a spe-
cial care product. Follow the manufacturer's
instructions. You can purchase special stain-
less steel cleaner from our after-sales service
or from specialist retailers.
Wipe the appliance with some washing-up liq-
Enamel sur-
uid and warm water. Dry with a soft cloth.
faces and lac-
quered
surfaces
Wipe the appliance with some washing-up liq-
Knobs
uid and warm water. Dry with a soft cloth.
Can be cleaned with glass cleaner. Do not
Glass panel
use any abrasive cleaning agents or sharp
metal objects. These could scratch and dam-
age the surface of the glass panel.
Wipe with a damp cloth. Dry with a soft cloth.
Seal
Clean with hot water or vinegar solution. For
Inside the
heavy soiling: Only use oven cleaner on cold
oven
surfaces.
Wipe the appliance with some washing-up liq-
Glass cover on
uid and warm water. Dry with a soft cloth.
the oven light
Soak in hot soapy water. Clean with a brush
Accessories
or a sponge.
Do not clean in the dishwasher. Never use
Aluminium
oven cleaner. To avoid scratches, never touch
baking tray
the metal surfaces with a knife or similar
(option)
sharp object. Clean horizontally with some
washing-up liquid and a damp glass cleaning
cloth or a microfibre cloth. Dry with a soft
cloth. Do not use any abrasive materials,
scouring sponges or rough cleaning cloths.
They could scratch the baking tray
.
Û
Ú .
position.
Û