Before Using The Oven For The First Time; Preheating The Oven; Cleaning The Accessories; Setting The Hob - Junker JH11AC.0 Serie Gebrauchsanleitung

Before using the oven for the first time

In this section, you can find out what you must do before using
your oven to prepare food for the first time. First read the
section on Safety information.

Preheating the oven

Unpleasant odours may emanate from the oven the first time it
is heated up. To eliminate these, first heat up the oven without
anything in it, keeping the door closed. Ensure that packaging
has not been left in the cooking compartment.

Setting the hob

Your hob comes with its own instruction manual. It contains
important safety guidelines, full instructions for setting and
extensive information on care and cleaning.

Setting the oven

Use the function and temperature selector to make oven
settings. In this section, we will explain how you can select the
required type of heating and temperature.

Types of heating and temperature

Example in the picture: Top/bottom heating, 190 ºC.
Turn the function and temperature selector to set the desired
temperature.

Care and cleaning

With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
36
Please ensure that the kitchen is well-ventilated while the oven
is heating up.
Use the function and temperature selector to set 240 °C.
1.
After 60 minutes, switch off the oven. To do so, turn the
2.
function and temperature selectors to the Off position.

Cleaning the accessories

Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
The oven heats up.
Switching off the appliance
Turn the function and temperature selector clockwise to the to
the position.
û

Cleaning agents

Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.