13 CE Conformity
Conformity
The product complies with the following EU Directives:
Machine:
2006/42/EC
Low Voltage:
2006/95/EC
EMC:
2004/108/EC
PED:
97/23/EC
EN-Directives:
EN 292-1, EN 292-2, EN 60335-1, EN 60335-2-15 or EN 60335-2-75, EN 55014, EN 61000-3,
EN 61000-4, ENV 50141, EN 55104
14 Disposal
This product complies with EU Directive 2002/96/EC and is registered according to WEEE (Waste Electrical and
Electronic Equipment).
15 Troubleshooting
Problem
Little or no crema on top of the
coffee
Sparse coffee dispensing, only drop
by drop
Weak "body"
Foam instead of crema
The machine is switched on, but the
machine does not work.
Instruction manual BARISTA · BARISTA PROFI
WEEE Reg. No.: DE69510123
Possible cause
The grind is not fine enough
The coffee is too old.
There is too much chlorine in the
water.
The amount of ground coffee is not
enough.
The shower screen is dirty.
The grind is too fine.
There is too much ground coffee.
The grind is not fine enough.
The coffee is old.
The amount of ground coffee is not
enough.
The shower screen is dirty.
The coffee beans are improper
The setting of the coffee grinder is
not suited for the coffee mixture in
use
The orange control lamp is switched
off: there is not enough water in the
water tank.
Water was refilled, the orange
control lamp is switched off.
The water tank is not fixed properly.
Troubleshooting
Use a finer grind.
Tamp the ground coffee more firmly.
Use fresh coffee.
Use a chlorine filter.
Take the right coffee amount:
Use approx. 7 g (1/4 ounce) of
coffee for each cup.
Clean the brew group.
Increase the grind setting.
Tamp the ground coffee only
slightly.
Use approx. 7 g (1/4 ounce) of
coffee for every cup.
Reduce the grind setting.
Use fresh coffee.
Use approx. 7 g (1/4 ounce) of
coffee for each cup.
Clean the shower screen.
Use another coffee bean.
Adjust the coffee grinder (When
changing the coffee beans, changing
the grind may also be necessary.)
Refill water.
Switch on/off the machine.
Fix the water tank properly.
17
ENGLISH