Call Barring (Electronic Lock); Babycall (Emergency Call) - Topcom Butler 200 Bedienungsanleitung

3. Press the line button . The telephone number is dialled automatically as
soon as the radio connection between the base station and the handset is
established.
8.7.3. SEARCHING A MEMORY NUMBER
1. Press the memory button (The contents of memory 1
appear on the display).
2. Press the memory button again
3. Each time you press the memory button
following memory number, each time followed by the corresponding
telephone number.
4. When you have found the desired telephone number, press the line button
The telephone number is now dialled automatically.
8.7.4. ERASING A MEMORY NUMBER
1. Press the set button .
2. Press the memory button .
3. Press the number of the memory place (0-9) of the memory number you wish
to erase.
4. Press the set button .

8.8. CALL BARRING (ELECTRONIC LOCK)

The numerical buttons of the Butler 200 (except the set button
electronically so that outgoing calls are not possible any more.
8.8.1. ACTIVATE CALL BARRING
R - Button
The key symbol appears on the display.
R e m a r k :
Incoming calls can still be answered, even when the electronic lock has been
activated.
14
.
, the display shows the
.
can be locked
8.8.2. DEACTIVATE CALL BARRING
R - Button
The key symbol on the display disappears.
8.8.3. AUTOMATIC ACTIVATION CALL BARRING
1 xxxx 11
The numeric buttons of the Butler 200 (except for the
can be activated automatically, 10 sec. after the last button pressed in standby
8.8.4. AUTOMATIC DEACTIVATION CALL BARRING
1 xxxx 10
The automatic lock is deactivated

8.9. BABYCALL (EMERGENCY CALL)

Thanks to the babycall function you can program the Butler 200 so that a prepro-
grammed telephone number is dialled automatically when pressing any button,
except the set button.
The memory for storing baby-call phone numbers shares the same memory
location '0' for storing a speed-dial phone number. That means that the telephone
number stored at memory location '0' can be re-programmed either by the method of
programming a speed-dial phone number or by the method of programming the
baby call phone number.
8.9.1. ENTERING A BABYCALL NUMBER
1 xxxx 42
1. Dial:
2. "0" appears on the display.
3. Enter the desired telephone number.
4. Press the set button .
8.9.2. ACTIVATE BABYCALL
1 xxxx 41
15
button)