Key Tone On/Off; Minutes Conversation Timer; Setting Pause Time; Setting Ringer Volume - Topcom Butler 200 Bedienungsanleitung

The babycall symbol appears on the display.
When you press a button (except the set button
ber is dialled automatically.
8.9.3. DEACTIVATE BABYCALL
1 xxxx 40
The babycall symbol disappears from the display.

8.10. KEY TONE ON/OFF

Standard the Butler 200 is set to sound a beep each time you push a button. This can
be deactivated as follows:
1 xxxx 50
To activate the key tones again, proceed as follows:
1 xxxx 51

8.11. 15 MINUTES CONVERSATION TIMER

To avoid that you would forget to end a conversation or that you accidentally press
the line button without having a conversation, you have the possibility to activate a
15 minutes conversation timer. This warns you after 15 minutes of conversation by
means of 10 beeps. To continue your conversation and to avoid the connection from
being broken automatically, press a numerical button (0-9) as soon as you hear the
first beeps.
To activate this function, proceed as follows:
1 xxxx 31
This function can also be deactivated again in the following way:
1 xxxx 30
16
), the programmed babycall num-

8.12. SETTING PAUSE TIME

I
2 xxxx 31
(for 1 second pause time)
2 xxxx 32
(for 2 seconds pause time)
2 xxxx 33
(for 3 seconds pause time)
2 xxxx 34
(for 4 seconds pause time)
If you wish to insert a pause when saving a memory number, just press the rediall
button . The pause will last as long as you have programmed it to be.

8.13. SETTING RINGER VOLUME

The ringer volume of the base station can be set by means of a ringer volume switch
on the right side of the base station. This switch allows you to set the volume
(position I= silent,position II= normal, position III= loud).

8.14. PAGING

With this function you can call the handset from the base station and vice versa.
Paging from base station to handset:
Press the paging button of the base station. The handset emits a ringer sound and
"INT" appears on the display during 20 seconds.
Press the line button to answer the internal call by means of 2 beeps. If you press the
line button again, the internal call is broken.
You can also call the base station from the handset. Proceed as follows:
5
17