Using The Test Tone - Yamaha DSP-Z9 Bedienungsanleitung

ADVANCED OPERATIONS

Using the test tone

You can use the test tone feature to manually balance your
speaker levels. Please note that this operation will override
the level adjustments made in the auto setup procedure
(page 31) and "Speaker Level" (page 69). Use the test tone
to set speaker levels so that the volume from each speaker
is identical when heard from your listening position.
MACRO
TRANSMIT RE-NAME CLEAR LEARN MACRO OFF ON
SYSTEM
POWER STANDBY V-AUX TUNER PHONO
CABLE SAT MD/TAPE CD-R CD
DTV/LD VCR 1 VCR 2 DVR DVD
MULTI CH IN
PURE DIRECT
TITLE
2,3
ENTER
SOURCE
INPUT MODE TOP EXIT
DISPLAY MENU SOUND
SELECT – +
SEARCH CHAPTER
POWER REC STOP PAUSE PLAY
10KEY AMP STEREO HALL 1 HALL 2 CHURCH
1 2 3 4
JAZZ ROCK MUSIC TV THTR
1
Press TEST.
The unit outputs a test tone.
2
Press k/n repeatedly to select the speaker
you want to adjust.
TEST L<->R
TEST L<->C
TEST L<->SL
TEST SL<->SR
TEST SL<->SB
TEST SL<->SBL
TEST SBL<->SBR
TEST L<->PL
TEST PL<->PR
TEST L<->SWL
TEST SWL<->SWR
TEST ALL
*
Select if you are using only one surround back
speaker.
54
6.1/5.1 MOVIE THX /DTS NIGHT
9 0 +10 +100
CHP/INDEX
A/B/C/D/E PRESET
TV INPUT MUTE
TV VOL CH VOLUME
TV MUTE STRAIGHT
DISC EFFECT
ON SCREEN
A SPEAKERS B
SLEEP TEST
1,4
PUSH
TEST
Front left and right speakers
Center speaker
Surround left speaker
Surround right speaker
*
Surround back speaker
Surround back left speaker
Surround back right speaker
Presence left speaker
Presence right speaker
Left subwoofer
Right subwoofer
All speakers
Notes
• If a speaker is not connected, the corresponding adjustment(s)
will not be displayed.
• If you are using only one surround back speaker, balance its
level against that of the surround left speaker.
• When the Subwoofer Set "Config." parameter is set to
Monaural (see page 66), balance the levels of both SWL and
SWR speakers against that of the front left speaker.
3
Press l / h to adjust the speaker volumes.
4
Press TEST once more when you have
completed your adjustment.
The test tone stops.
y
• Use a handheld SPL meter, hold at arms length and point
upwards so that the meter is in the listening position. With the
meter set to the 70 dB scale and to C SLOW, calibrate each
speaker to 75 dB.
• Before outputting the test tone, we recommend that you set the
output volume to 0 dB.
• Press ENTER while outputting the test tone to switch the test
tone to the currently selected set of speakers. Hold down
ENTER for 2 seconds or more to fix the test tone to output only
from the current speaker. The upper right area of the screen
changes as follows:
...the output speaker is fixed.
Note
You cannot enter the test mode if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES jack.
If you press ENTER for 2
seconds or more...