Remote Controlling Zone 2 - Yamaha DSP-Z9 Bedienungsanleitung

ZONE 2
Using this unit's internal amplifier
To use this unit's internal amplifier, select ON in ZONE2 AMP.

Remote controlling Zone 2

The supplied remote control can be used to control Zone
2. You can even select the input source and control
components located in the main room directly from the
second room regardless of the listening condition in the
main room.
■ To enable Zone mode on the remote
control
This allows you to switch the remote control mode from
one room to another, and use STANDBY, SYSTEM
POWER, MUTE, and VOLUME +/– to control the
selected room.
1
Set REC OUT/ZONE 2 on the front panel to
SOURCE/REMOTE.
REC OUT/ZONE 2
SOURCE/REMOTE
DTV/LD
CABLE
SAT
VCR 1
VCR 2
DVR
VIDEO AUX
2
Repeat steps 1 and 2 of the procedure in
"Setting manufacturer codes" on page 81.
3
Press l / h to select "L:AMP".
ENTER
94
+
+
R L
– –
PRESENCE PRESENCE
/ZONE 2
/ZONE 2
This unit
DVD
MD/TAPE
CD-R
CD
TUNER
PHONO
Second room
4
Press k/n to select "Zone".
ENTER
5
Press LEARN to complete the Zone setup.
The remote control is able to operate this unit from
Zone 2.
LEARN
■ To control Zone 2
1
Press SOURCE SELECT k repeatedly to
display "Zone 2" in the display window.
SOURCE
2
Press SYSTEM POWER to turn on the power
for Zone 2.
SELECT