Sony LZ51-C Bedienungsanleitung Seite 78

(4) Stop bit setting (Continued from P.72.)
3. Select "STP" and press
The stop bit setting menu screen appears.
The selected item flashes.
The initial value is 1 stop bit (1).
"1" : 1 stop bits
"2" : 2 stop bits
4. Select the desired item with the cursor movement
keys .
• To enter the settings
5. After selecting the desired item, press
Enters the setting.
(In this case, "2 stop bit" (2).)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
5. Press
RESET
or select "End" and press
Interrupts the stop bit setting.
(Previous setting contents remain.)
76
.
ENTER
.
ENTER
.
ENTER
Main display
Sub-display
Main display
Sub-display
(Lights)
↓
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display