Sony LZ51-C Bedienungsanleitung Seite 105

Main command
S Set C12
CN
D Display N
P
M
H Header ON
OF
M Memory (Note 2) ON
OF
Notes
1. The initial settings can also be used.
2. These command cannot be used with Ver. 01.14 and earlier LY51 display units. If used, stored data may be damaged.
Sub-command
Comparator setting values and
positioning data
1 Set No. (01 to 16)
2 Setting value No. (1 to 4)
Comparator setting value (1 to 4)
Positioning data (1)
Comparator set No.
Mode switching (current value)
Mode switching (peak hold)
Mode switching
On
Off
On
Off
Value Command contents
Setting value Set comparator setting values and positioning data
Set No. Change comparator set No.
Switch display mode (current value)
Switch display mode (peak hold)
Switch display mode (peak hold ↔ current value)
Attach header to output data
Do not attach header to output data
Store current value when power is turned off
Do not store current value when power is turned off
103