Sony LZ51-C Bedienungsanleitung Seite 104

Main command
L Zero point load
H Zero point hold
P Preset
102
Sub-command
None Zero point wait status
(reference mode)
O Zero point wait status only
O Zero point wait status only
H Zero point wait status only
C Cancel zero point wait status
and reference mode
ST Temporarily pause reference mode
RO Restart reference mode
A ABS (absolute) value
None Zero point wait status
C Cancel zero point wait status
and reference mode
S Store
CL 1/2 (center line)
None
RC Recall
Value Command contents
Wait for zero point (start reference mode after
passing zero point)
Wait for zero point (do not start reference mode after
passing zero point)
Offset value Wait for zero point with offset value (as above)
Wait for zero point with stored held value (as above)
Cancel zero point wait status and zero point
reference mode
Temporarily pause zero point reference mode
Restart zero point reference mode
Display and output value for current position using
value when zero point is passed as reference
Wait for and hold zero point
Cancel zero point wait status and zero point hold
status
Store held value and release hold status
("STR" serves as the same command as "HS".)
Release hold status and halve value
Preset value Preset current value
Preset current value again
[recall preset value ("Q" serves as the same
command as "PRC".)]