Siemens SIPLUS RIC IEC on S7 Handbuch Seite 50

FB100
L2_Error_DelayTime
L2_Ack_Buf_Dim
Buffer_Handling
Next_Info
Send_StartDT
Do_Restart
First_internal_DB_No
Serial_from_CPU *1)
P_Application
L2_Error_Link
Con_Err_C1
Con_Err_C2
C1_isActive
C2_isActive
FB_RetVal
More_Info_available *2)
More_info_is_spo *2)
Buffer_Info_lost
Time_DS
Time_IV
Time_SY
Time_Diff
*1) Parameter nur in Produktvariante für S7-400 am Baustein herausgeführt.
*2) Parameter nur bis Variante V1.4 vorhanden
SIPLUS RIC IEC on S7 V1.5
Funktionsbeschreibung
Typ Default
IN TIME T#10S
IN INT 0
IN BYTE B#16#0
IN BOOL FALSE
IN BOOL FALSE
IN BOOL FALSE
IN INT 50
IN BOOL FALSE
OUT DWORD DW#16#0
OUT BOOL FALSE
OUT BOOL FALSE
OUT BOOL FALSE
OUT BOOL FALSE
OUT BOOL FALSE
OUT WORD W#16#0
OUT BOOL FALSE
OUT BOOL FALSE
OUT BOOL FALSE
IN/OUT BOOL FALSE
IN/OUT BOOL TRUE
IN/OUT BOOL FALSE
IN/OUT Time T#0MS
Seite 50 von 235
Baustein-Kommentar / Kurzbeschreibung
Def: 10 sec: after this time L2_Error_Link will be set, if
no con. is active
0(def): without; <>0 (we suggest 1600): dimension
[byte] of ack-buffer;
0(def): compl, 1:compl. if ov 2:oldest Info will deleted;
3:no act.
Only allowed for additional calls in a Cycle ->reduced
operation -> next info
a rising edge sends a StartDT (only as master and if
tcp-conn)
a rising edge restarts the IEC-Application
First DB-Number for DBs created by the Runtime
Software; Default: 50;
for Registration use serial number from CPU instead
of memory card
Pointer to Application Functions (SL_x, MA_x)
Set, if no Connection
L2_Error_DelayTime.
Set, if tcp connection 1 is not established
Set, if tcp connection 2 is not established
Set, if tcp connection 1 is controlling the process data
(StartDT)
Set, if tcp connection 2 is controlling the process data
(StartDT)
positive Values -> ok; negative Values (16#8xxx) ->
Error
Set, if more infos are available for processing in the
actual OB1-cycle.
More info is spontaneous
in case of Link_Err one ore more Info were deleted
from the buffers
Time-Qualifier DaylightSaving (Summertime)
Time-Qualifier Time is InValid
Time-Qualifier Time is synchronized (actually only in-
ternal used)
Time difference between CPU-Time and desired IEC-
Time-Stamps
I IA CE
is active longer than
©SIEMENS AG 2013