Maintenance - EUROM Q-time 1500 Bedienungsanleitung

USE
To use the heater, if required insert the plug into the socket and pull on the pull switch.
Each time that you pull the pull switch, the heater will change to the next setting:
0 (off) > 1 (500W) > 2 (1,000W) > 3 (1,500W) > 0 etc.

MAINTENANCE

Before you perform maintenance on the heater, you have to turn off the power supply.
This heater does not require any specific maintenance. Keep the ventilation and radiation
openings, as well as the heat screen, clean and dust-free, but when cleaning the quartz
elements, make sure that you do not touch them; it is best to blow any dust away frequent-
ly.
To clean the exterior, use a soft cloth which can be damp. At the very most, use a mild
cleaning agent: no abrasives or sponges and no caustic substances.
If a defect occurs, disconnect the heater from the power supply and go to a service point.
Do not perform any repairs yourself and always ask that original parts are used in any re-
pairs.
REMOVAL
In the EU this symbol indicates that this product may be disposed of as ordinary
household waste. Old equipment contains valuable materials, suitable for
recycling. These materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by unregulated
waste collection. Therefore, please make sure that you bring old equipment to a
designated collection point. Alternatively, contact the original supplier, who can
make sure that as many of the components as possible can be recycled.
17