Changing The Video Mode Of Consoles - G&D DP1.2-Vision-CAT Bedienungsanleitung

Configuration
1. Click on
KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click on the tab
the module).
CPU
Click on the tab
remote console (at the
4. Under
Permanent Access mode
Enabled
Disabled
5. Click OK to save your changes.
Related topics:
 Operating the KVM extender exclusively on page 15
 Changing the video mode of consoles on page 30

Changing the video mode of consoles

In the standard configuration of the KVM extender, the computer's image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is shown again as soon as the user has finished their
inputs at the console.
30 · G&D DP1.2-Vision-CAT
if you want to adjust the right for the local console (at
Local
Remote > General
module).
CON
select one of the following options:
 right for exclusive access is granted (default)
 right for exclusive access is denied
on the directory tree.
, if you want to adjust the right for the