Changing The Video Mode Of Consoles - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Changing the video mode of consoles

In the standard configuration of the KVM extender, the computer's image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is shown again as soon as the user has finished their
inputs at the console.
How to select the video mode of a console:
1. Press
Ctrl+Num
2. Select the row
mode for the remote console (at the
Select the row
video mode for the local console (at the
3. Under
Video mode
 image is always on (default)
always on
switch off  switch off image for actions at the other console
4. Press to save your settings.
F2
1. Click on KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click on the tab
console (at the
Click on the tab
the remote console (at the
4. Under Image display
 always on (default)
 off for actions at remote/local console
5. Click OK to save your changes.
Related topics:
 Changing the time span of the input lock on page 30
 Right for exclusive access to the console on page 30
(default) to open the on-screen display.
Console setup and press
and press
Local console setup
press to select one of the following options:
F8
if you want to adjust the video mode for the local
Local
CPU module).
Remote > General if you want to adjust the video mode for
CON module).
select one of the following options:
Enter if you want to adjust the video
module).
CON
if you want to adjust the
Enter
CPU module).
on the directory tree.
G&D DP-Vision-Fiber · 32
Configuration