Configuring Global Network Settings - G&D DP1.2-Vision-CAT Bedienungsanleitung

Initial configuration of the network settings
Netmask:
Connection type:
5. Press F2 to save your settings.

Configuring global network settings

Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the local hotkey
work interface of the user module or use the
open the remote OSD to configure the network interface of the computer module.
2. Select the entry
3. Select the entry
4. Enter the following data under
Global
preferences:
Hostname:
Domain:
Gateway:
DNS Server 1:
DNS Server 2:
5. Press to save your settings.
F2
14 · G&D DP1.2-Vision-CAT
Enter the netmask of the network.
The operational mode DHCP does not allow making entries.
Press -Taste to define if the network interface and its com-
F8
munication partner are to negotiate the connection type
automatically (
(default: Alt + Num
Network setup and press
Interfaces and press
Main Network
Press to select the global preferences:
F8
uses static settings.
 Static:
 DHCP: obtains settings from a DHCP server.
Enter the device hostname.
Enter the domain the device is to belong to.
Enter the gateway IP address.
Enter the IP address of the DNS server.
Optionally, enter the IP address of another DNS server.
) or select one of the types available.
Auto
) to open the local OSD to configure the net-
remote hotkey
Enter .
Enter .
:
(default: Ctrl + Num ) to