en
Intended use
Intended use
This accessory is designed for the MUM4 food processor.
Follow the operating instructions for the food processor.
Never use the accessory for other appliances. Only use matching
parts together.
Depending on assembly, this accessory is suitable for the following
purposes:
Blender: For mincing, puréeing, blending, kneading, cutting and for
making sauces and mixed drinks.
Chopper: For shredding, grating and cutting up food.
Food which is to be processed must not contain any hard compo
nents (e.g. bones). The accessory must not be used for processing
other objects or substances.
Important safety information
W Risk of injury!
■ Never reach into the feed chute. Only use the pusher provided!
■ Never grasp the sharp blades or edges of the cutting discs. Take
hold of discs by the edge only!
■ Never grasp the sharp edges of the multifunction blade. Take
hold of the multifunction blade by the plastic part only.
■ The accessory must be completely assembled before use. Never
assemble the accessory on the base unit. The accessory should
only be used in the intended operating position. Before attaching
or removing the accessory, wait until the drive has come to
a standstill and pull out the mains plug.
W Caution!
Check that there are no foreign objects in the feed chute or housing.
Do not insert objects (e.g. knives, spoons) into the feed chute or
housing. Do not operate accessory at no load.
W Important!
It is essential to clean the accessory thoroughly after each use or
after it has not been used for an extended period. X "Cleaning and
maintenance" see page 11
8