Accessories And Spare Parts - Kärcher HDS 1000 BE Originalbetriebsanleitung

 Clean/ replace backflow valve in the
connection of the detergent suction
hose.
Detergent dosing valve is closed or
–
leaky/ blocked
 Open or check/clean detergent dosing
valve.
Overflow valve keeps switching on/
off when the hand-spray gun is
opened
Nozzle is blocked
–
 Clean the nozzle.
Appliance is decalcified
–
 Decalcify appliance.
Sieve in the water shortage safe guard
–
is dirty
 Clean sieve.
Overflow valve is defective
–
 Replace overflow valve (Customer
Service).
Burner does not start
Fuel tank empty
–
 Refill.
Water shortage
–
 Check water supply, check connec-
tions.
 Clean sieve in the water shortage safe
guard.
Fuel filter dirty
–
 Change fuel filter.
No ignition spark
–
 If device is in use and no ignition spark
can be seen through the viewing glas,
have device checked by customer serv-
ice.
Set temperature is not achieved
while using hot water
Working pressure/flow rate to high
–
 Reduce working pressure/ flow quantity
on the hand spray gun.
Sooty heating spiral
–
 Have device de-sooted by customer
service.
If malfunction can not be fixed, the de-
vice must be checked by customer serv-
ice.

Accessories and Spare Parts

Only use accessories and spare parts
–
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and troublefree.
At the end of the operating instructions
–
you will find a selected list of spare parts
that are often required.
For additional information about spare
–
parts, please go to the Service section
at www.kaercher.com.
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
12
-
EN
Warranty
31