Machine Programme - Migatronic PILOT 1800 Betriebsanleitung

Vorschau ausblenden Andere Handbücher für PILOT 1800:

Betriebsanleitung (13 Seiten)

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

PILOT 1800/2400 is a line of portable welding

machines, especially designed for welding where

weight and dimensions have to be small.

The machine is available in six versions:

PILOT 1800 E

PILOT 1800 H

PILOT 1800 HP

All versions are included in this instruction manual.

PILOT 1800 E / 2400 E

MMA welding machines with a max. current of re-

spectively 180 A and 240 A. The machine has ad-

justable Arc-power and hot start and can be

equipped with connection for external adjustment.

PILOT 1800 H / PILOT 2400 H

MMA and TIG welding machines with a max. current

of respectively 180 A and 240 A. The machine has

adjustable Arc-power and hot start for MMA welding

and adjustable pre-flow, post-flow and slope-down

for TIG welding. Moreover, it possible to choose be-

tween 2-times and four times welding and between

HF and LIFTIG ignition. The machine can be

equipped with connection for external adjustment

and connection for cooling module for torch cooling.

PILOT 1800 HP / PILOT 2400 HP:

MMA and TIG welding machines with a max. current

of respectively 180 A and 240 A. Moreover, the

machine can be used for pulse welding. In

connection with pulse welding it is possible to adjust

pulse time, pause time and base amp. The machine

has a pilot arc. The machine has adjustable Arc-

power and hot start for MMA welding and adjustable

pre-flow, post-flow, starting current, slope-up, re-

duced current, slope-down, and stop current for TIG

welding. Moreover, it possible to choose between

two-times, four-times and spot welding and between

HF and LIFTIG ignition. The machine can be

equipped with connection for external adjustment

and connection for cooling module for torch cooling.

The machine memorises 8 and 16 complete welding

settings respectively.

Transportation equipment

The MIGATRONIC programme includes a transport

trolley and shoulder strap which can be used for alle

PILOT versions.

Hoses

The machine can be equipped with TIG welding

hoses, electrode holders and return current cables

from the MIGATRONIC programme. If a TIG torch

with adjustment is used, the welding current can be

adjusted from the torch.