Rinsing; Subsequent Cleaning; Emptying The Drip Tray - CONSTRUCTA CC4P86660 Gebrauchsanleitung

Pour the descaling solution into the water tank and
7.
slide the water tank in fully.
Close the tank cover.
8.
Touch the @ button.
9.
The appliance will now be descaled. The remaining
time counts down on the display. An audible signal
will sound once descaling has finished.The
appliance will be stopped.
Rinse cycle after descaling
Open the tank cover.
1.
Remove the drip tray, empty it and slide it back in.
2.
Remove the water tank, rinse it thoroughly, fill it with
3.
fresh water and slide it back in.
Close the tank cover.
4.
Touch the @ button.
5.
The appliance will now be rinsed. An audible signal
will sound once the rinse cycle has finished. Empty
the drip tray.
Note:
When using descaling tablets (order no. 311 846), you
must also run the Rinse cleaning function twice.

Rinsing

To ensure that your appliance stays clean, you can
pump water through the pipe system. The water is then
drained to the drip tray.
Starting
Use the function selector to select the rinse cycle $.
1.
The duration of the programme will be displayed.It
cannot be changed.
Open the tank cover.
2.
Remove and empty the drip tray.
3.
Slide the empty drip tray in fully.
4.
Remove the water tank and fill it with fresh water.
5.
Slide the water tank in fully.
6.
Close the tank cover.
7.
Touch the @ button.
8.
Water is pumped through the pipes.The time
remaining will count down on the display. An audible
signal will sound once this time has elapsed. Empty
the drip tray.

Subsequent cleaning

Carry out the following steps after every descaling
programme or rinse cycle:
Open the tank cover.
1.
Empty, clean and dry the drip tray and water tank.
2.
Turn the function selector to the off position.
3.
The process is complete and the appliance is ready
for use again.

Emptying the drip tray

With the cleaning functions, the residual water is
collected in the drip tray. Then empty and dry the drip
tray.
Caution!
Do not dry the drip tray in the hot cooking
■
compartment. This will damage the drip tray.
Do not clean the drip tray in the dishwasher. This will
■
damage the drip tray.
Briefly press on the centre of the tank cover.
1.
The tank cover opens. The drip tray and water tank
can now be accessed.
Remove the drip tray from the tank recess.
2.
Open the lid for the drip tray.
3.
Empty the drip tray.
4.
Insert the drip tray back into the tank recess and
5.
slide it in fully.
Close the tank cover.
6.
The appliance is ready to use.
Cleaning function
en
77