Before Using For The First Time; Initial Use; Set The Water Hardness Range; Cleaning The Cooking Compartment And Accessories - CONSTRUCTA CC4P86660 Gebrauchsanleitung

Before using for the first time

en
KBefore using for the first
time
B efore you can use your new appliance, you must
B e f o r e u s i n g f o r t h e f i r s t t i m e
make some settings. You must also clean the cooking
compartment and accessories.
The appliance must be fully installed and connected to
the mains.

Initial use

After connecting the electricity supply or after a power
cut, the display prompts you to set the time. It may take
a few seconds for the instruction to appear.
Setting the time
During initial use, the time display is highlighted.
The‚ƒ:‹‹ value flashes in the display and the 0
symbol lights up. Set the time.
Use the rotary selector to set the time.
1.
Touch 0.
2.
The time has now been set.
Changing the time on the clock
Note: To change the time on the clock, you will need to
switch off the appliance.
Touch the 0 button twice.
1.
The 0 symbol and the clock time will appear on the
display.
Set the clock using the rotary selector.
2.
Touch the 0 button.
3.
The time has now been set.
Notes
If you do not touch the 0 button after setting the
■
time, the set value is automatically adopted after a
few seconds.
If the function selector has been moved to configure
■
the settings, it must be returned to the "Off" position
once you have finished. Only then can the appliance
be used.
In order to reduce the energy consumption of your
■
appliance in standby, you can hide the clock.
60

Set the water hardness range.

S o that the appliance can reliably remind you to
S e t t i n g t h e w a t e r h a r d n e s s r a n g e
descale it when required, you must set your water
hardness range correctly.
The water hardness range is set to 4 (very hard) ex
works.
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(>40 mg/l) or other liquids.
Only use fresh, cold, non-carbonated tap water or
softened water.
Notes
If your water is very hard, we recommend that you
■
use softened water.
If you only use softened water, you can set the water
■
hardness range to "softened" in this case.
If you use mineral water, set the water hardness
■
range to "4 very hard".
If you use mineral water, you must only use non-
■
carbonated mineral water.
Water hardness range
0
1 (up to 1.3 mmol/l)
2 (1.3 - 2.5 mmol/l)
3 (2.5 - 3.8 mmol/l)
4 (above 3.8 mmol/l)
You can change the water hardness in the basic
settings.~ "Basic settings" on page 74
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed. One hour with Hot air ~ at 180 °C
is ideal for this. Ensure that no packaging remnants
have been left in the cooking compartment.
Use the function selector to set Hot air ~.
1.
Use the rotary selector to set to 180 ºC.
2.
Touch @.
3.
The appliance begins to heat up.
Switch off the appliance after one hour. To do so, touch
@ and then turn the function selector to the off position.
Cleaning the accessories
Before you use the accessories for the first time, clean
them thoroughly with hot soapy water and a soft dish
cloth.
Setting
0 softened
1 soft
2 medium
3 hard
4 very hard