Torqeedo Ultralight 403 Bedienungsanleitung Seite 50

Remove the screws from the bolts. Insert the
aluminum keys from the top onto a bolt. The
screw prevents the bolt from turning when being
tightened.
Insert the bolt into one of the drill holes. Ensure
that the bolt fits easily through the drill hole wit-
hout being pressed together.
If possible insert the white plastic plate with 8
drill holes over the bolt from the inside. The plate
strengthens the kayak wall.
If this is not possible the bolts can also be fixed to
the kayak without the counter-support plate.
Insert the screw through the key into the bolt and
tighten the screw with a screwdriver.
The aluminum screw prevents the bolt turning
with the screw.
50
This expands the bolt onto the inside of the kayak.
Please note that there must be enough space
for this.