Transport; Fitting; Fitting Indoors - Exhausto BESB Betriebsanleitung

3004348_2017_08_24.fm

1.2 Transport

The ventilator is delivered packaged and can be transported on a pallet. Once unpacked
the ventilator should be handled carefully, especially the spigots etc. Deformation could
result in internal damage to the moving parts.
If there is not a lot of space to move the ventilator, the service door can be dismounted
as shown in section 1.1.
NB The ventilator must not be lifted using the service door handle.
Weight

1.3 Fitting

1.3.1 Fitting indoors

There are various ways of fitting the
ventilator indoors (Fig. 2).
With methods B and D the service door
must be kept in the open position during
service. A safety fitting for this purpose can
be supplied (including an assembly kit).
If the ventilator is to run intermittently, there
is a risk of condensation in the motor.
Therefore, use mounting method A or B
only.
Service access Wherever the ventilator is fitted, there
should be space enough to be able to open
the service door to an angle of approx. 80°
and to access the locking screws.
Warning
BESB 250
kg 52
The motor must never be placed vertically under the cabinet and the
motor and EC control must never be covered or they will overheat.
5/64
GB - BESB – Product information
315 400
57 73
Fig. 2
D
D
500
88 91 (-3)
Fig. 3