Gb - Fitting; Transport Safety Fitting Dtv315, Dtv400 And Dtv450; Tgk Roof Duct - Exhausto DTV160 Bedienungsanleitung

3004347_2017_07_31.fm
Size and weight

2. GB - Fitting

2.1 Transport safety fitting DTV315, DTV400 and DTV450

Before installation
Remove the transport safety fitting by the centrifugal impeller (can be done without
having to open the fan) and check that the impeller turns freely.

2.2 TGK roof duct

Construction EXHAUSTO standard TGK roof ducts are made
of galvanised plate casing, with 50 mm mineral
wool for insulation/sound absorption and
fibreglass and has an internal galvanised
perforated plate.
The roof duct has an inner cable conduit, through
which the isolation switch cabling and the
cabling can be pulled all the way through.
The roof duct is delivered with anti-backdraught
shutters AOR.
Installing the Fit the isolation switch (not supplied by EXHAUSTO) on the TGK roof duct directly onto
isolation switch the seal. The fan's connecting cable is fed in from the bottom through the threaded cable
entry.
DTV 160
11
Weight, kg
200 250
17 28
6/84
GB - Fitting
315 400
37 52
450
60