Tools And Measurement Devices; General; Tools Required; Measuring And Inspection Equipment - Fronius 10.0-1 Serviceanleitung

Tools and measurement devices

General

The "Tools and measurement devices" chapter contains an overview and a description of
all the tools needed to properly service the device. This includes the following tools:
-
-
-

Tools required

-
-
-
-
-
-
-
-
-
-
-
-
-
-
Measuring and In- -
spection Equip- -
ment
Auxiliary materi- -
als -
-
-
Required tools

Measuring and inspection equipment

Auxiliary materials

Torx screwdriver, TX20
Torx screwdriver, TX25
Slotted screwdriver, 3 mm
Socket wrench
Socket wrench insert, 7 mm
Socket wrench insert, 36 mm
Flat wrench, 7 mm
Flat wrench, 36 mm
Diagonal cutting pliers
Needle-nosed pliers
Torque screwdriver with bit insert, 1 - 6 Nm
Torque ratchet, 1 - 10 Nm
Allen key, 4 mm
Allen key, 5 mm
Digital multimeter
Equipment for safety inspection
Cleaning material (spray, paper)
Cable ties 102 and 200
Heat conducting film TPC (42,0300,3054)
Screw with gasket PT 5x25 (42,0401,4231)
89