Preparing Milk Foam And Warm Milk; Preparing Hot Water; Preparing Beverages With Recipes; Changing Beverage Settings Before And During Preparation - Melitta CI touch Bedienungsanleitung

Preparing beverages
» Beverage dispensing takes place
and ends automatically.
» The display shows: Easy Cleaning?
3. Remove the vessel.
4. Run the Easy Cleaning programme or
prepare another beverage and run the
Easy Cleaning programme later, see
chapter 9.4.
5.3 Preparing milk foam and
warm milk
The preparation of milk foam and warm
milk is similar.
Requirement: Milk is connected.
1. Place a vessel beneath the spout.
2. Press the "Milk foam/milk" button.
a) Milk foam = briefly press button
b) Warm milk = press the button longer
(2 seconds)
» Milk dispensing takes place and is
ended automatically.
3. Remove the vessel.
» The display shows: Easy Cleaning?
4. Run the Easy Cleaning programme or
prepare another beverage and run the
Easy Cleaning programme later, see
chapter 9.4.

5.4 Preparing hot water

1. Place a vessel beneath the spout.
2. Press the "Hot water" button.
» The hot water dispensing takes
place and ends automatically.
3. Remove the vessel.
5.5 Preparing beverages with
recipes
In addition to standard dispensing, you
can select Recipes for further beverage
specialities in the menu.
Information
40
When selecting a recipe with milk, connect
the milk container or a commercially
available milk pack (depending on the
model).
1. Place a vessel beneath the spout.
2. Press the "Rotary switch" and navi-
gate to the Recipes menu or keep the
"my recipes" button pressed.
» The recipe selection appears on the
display.
3. Select a beverage recipe and confirm
your selection.
» Beverage dispensing takes place
and ends automatically.
4. Remove the vessel.
5.6 Changing beverage set-
tings before and during
preparation
Beverage settings can be changed before
and during beverage preparation.
Information
These settings only apply to the current
beverage preparation.
Changing beverage settings before
preparation
The bean type can be changed before
selecting a beverage.
Before selecting a beverage, set
ƒ
the desired bean chamber with the
"BEAN SELECT" slider.
» The selected bean type is used for the
beverage preparation.
Changing beverage settings during
preparation
The beverage quantity and the coffee
strength can be changed during beverage
preparation.
Requirement: The ready symbol appears
on the display.