Connecting An External Amplifier; Connecting A Yamaha Ipod Universal Dock Or Bluetooth™ Wireless Audio Receiver - Yamaha RX-V1065 Bedienungsanleitung

■

Connecting an external amplifier

If you want to use another amplifier, connect an external
amplifier to the PRE OUT jacks. Each PRE OUT jack
outputs the same channel signals as the corresponding
speaker terminals.
Note
• When you make connections to the PRE OUT jacks, do not make any
connections to the speaker terminals.
a b
FRONT SURROUND
a
FRONT PRE OUT jacks
Front channel output jacks.
b
SURROUND PRE OUT jacks
Surround channel output jacks.
c
SUR.BACK PRE OUT jacks
Surround back output jacks. When you only connect one
external amplifier for the surround back channel, connect it to
the left SUR.BACK (SINGLE) jack.
y
• To output surround back channel signals at these jacks, set
"Surround Speaker" to any parameter except "None" (page 48).
d
CENTER PRE OUT jack
Center channel output jack.
e
SUBWOOFER PRE OUT 1/2 jack
Connect a subwoofer with a built-in amplifier.
■
Transmitting/receiving remote control signals
When the components have the capability of the
transmission of the remote control signals, connect the
REMOTE IN and REMOTE OUT jacks to the remote
control input and output jack with the monaural analog
mini cable as follows.
HDMI 1 HDMI 2
BD/DVD)
MONITOR OUT
COMPONENT
VIDEO
P
R
OUT
P VIDEO
B
Y
Remote
control out
Infrared signal
receiver or Yamaha
component
c d
SINGLE CENTER
SUR. BACK 1 SUBWOOFER 2
PRE OUT
e
HDMI 3 HDMI 4
REMOTE
IN
Remote
control in
IR flasher or Yamaha
component
(CD or DVD player, etc.)
y
• If connecting a Yamaha component that supports the SCENE control
signal reception to the REMOTE OUT jack of this unit, you can start
playback on the Yamaha component by using the SCENE function
(page 23).
• If connecting a component other than Yamaha products to the REMOTE
OUT jack of this unit, set "SCENE IR" to "OFF" in the advanced setup
menu (page 57).
Connecting a Yamaha iPod universal
dock or Bluetooth™ wireless audio
receiver
This unit has the DOCK terminal, to which you can
connect a Yamaha iPod universal dock (YDS-11, sold
separately) or a Bluetooth wireless audio receiver (YBA-
10, sold separately). You can play an iPod or a Bluetooth
component with this unit by connecting it to the DOCK
terminal.
Use a dedicated cable for connection between the dock/
receiver and this unit.
DOCK
COMPONENT
VIDEO
P
R
P
B
Y
Yamaha iPod universal dock or
Bluetooth wireless audio receiver
Connections
HDMI OUT
PHONO ANTENNA
S VIDEO
UNBAL.
GND A
FM
GND
VIDEO
17
En