Selecting And Transferring A Saved File; Transferring All Saved Files To The Pc; Setting The Content To Be Transferred (Statistics And/Or Readings); Options (6 Menu Item) - PCE Instruments PCE-CT 100 Bedienungsanleitung

10.2

Selecting and transferring a saved file

Procedure:
1. Connect PCE-CT 100 to the PC, using a USB interface cable or a Bluetooth connection. The
Bluetooth connection must be initialised from the PC.
2. Press Arrow Up key three times; "File transfer" appears on the display
3. Press OK key; "Send active file" appears on the display
4. Press Arrow Down key; "Select file" appears on the display
5. Press OK key; "Select file" appears on the display, along with, e. g. "D002"
6. Use the arrow keys to select a file to be transferred, e. g. "D003"
7. Press OK key; "In progress..." appears on the display for a short time, followed by the start
screen with the four dashes – – – –
10.3

Transferring all saved files to the PC

This section describes the process of transferring all files to a PC. The data stored in Direct mode
are not transferred in this process.
Procedure:
1. Connect PCE-CT 100 to the PC, using a USB interface cable or a Bluetooth connection. The
Bluetooth connection must be initialised from the PC.
2. Press Arrow Up key three times; "File transfer" appears on the display
3. Press OK key; "Send active file" appears on the display
4. Press Arrow Down key twice; "Send all files" appears on the display
5. Press OK key; "In progress..." appears on the display for a short time, followed by the start
screen with the four dashes – – – –
You can now continue measuring either in the currently active file or, after closing, in another file.
10.4

Setting the content to be transferred (statistics and/or readings)

This section describes how to pre-set the content to be transferred to the computer, i. e. whether
only the readings, only the statistics or both readings and statistics should be transferred.
Procedure:
1. Press Arrow Up key three times; "File transfer" appears on the display
2. Press OK key; "Send active file" appears on the display
3. Press Arrow Up key; "Transfer content" appears on the display
4. Press OK key; the current setting on the data to be transferred will appear
5. Use the arrow keys to select the desired transfer content: "Statistics and readings",
"Statistics" or "Readings"
6. Press OK key; your choice, e. g. "Transfer content: stat. + readings", appears on the display
for a short time, followed by the start screen with the four dashes – – – –
th
11 Options (6 menu item)
Via this menu item, you can define the settings described below. They are kept after the gauge
has been switched off. At the delivery state or after a total reset, the first menu item of an option
menu will be set as default(e. g. µm/mm).
© PCE Instruments
53