Performing The Measurement; Export Of Series Of Measurements; Loading And Saving Series Of Measurements - PCE Instruments PCE-FM 200 Bedienungsanleitung

Another click on the
icon.
The original graphics can be restored at any time by clicking on the
magnifying glass or hand.
The background of the graphics and its representation can be changed via the
right. A click on the icon works like a switch:
A single click makes the division of the background finer and adds some more dots to the
graphics. A further click on the icon changes back to standard view.
The currently displayed graphics can also be printed.
A click on the icon opens the "Print" dialog.
6.7

Performing the measurement

If an connection to the PCE-FM 200 is active, a new measurement can be started.
After clicking on the corresponding icon in the toolbar ("Start a measurement"), a new dialog is
displayed, with the help of which additional options, relevant for the upcoming measurement,
can be determined.
An ongoing measurement can be terminated by clicking on the
6.8

Export of series of measurements

Measurement series can also be exported. The entire content of one series of measurements
can be exported in CSV format by using the
6.9

Loading and saving series of measurements

A series of measurements can be loaded and saved via the
icon changes back to enlargement mode, which is recognizable by the
© PCE Instruments
icon in the toolbar.
icon of the toolbar.
and the
8
icon next to the
icon to the
icon in the toolbar.