Herunterladen Inhalt Inhalt Diese Seite drucken

Replacing The Oven Lamp - Bauknecht BCTM 9100 Benutzer- Und Wartungshandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

REPLACING THE OVEN LAMP

To replace the rear lamp (if present):
1.
Disconnect the oven from the power supply.
2.
Unscrew the lamp cover (Fig. 8), replace the lamp (see note for lamp type) and screw the lamp cover
back on.
3.
Reconnect the oven to the power supply.
To replace the side lamp (if present):
1.
Disconnect the oven from the power supply.
2.
Remove the side accessory holder grilles, if present.
3.
Use a screwdriver to prise off the lamp cover.
4.
Replace the lamp (see note for lamp type).
5.
Refit the lamp cover, pushing it on firmly until it clicks into place.
6.
Refit the side accessory holder grilles.
7.
Reconnect the oven to the power supply.
Fig. 8
Fig. 9
N.B:
-
Only use 25-40W/230V type E-14, T300°C incandescent lamps, or 20-40W/230 V type G9, T300°C
halogen lamps.
-
Lamps are available from our After-sales Service.
IMPORTANT:
-
If using halogen lamps, do not handle with bare hands since fingerprints can damage them.
-
Do not use the oven until the lamp cover has been repositioned.
Fig. 10
Fig. 11
GB32

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis