Assembly Of Seat Unit - Emmaljunga Cerox 2.0 Gebrauchsanweisung

Assembly of the seat unit
1
2
3
3
4b
4a
6b
5
6a
4
7
8
5
9
22
Attach the seat-unit and the 5-point harness
• Press the back rest release mechanism (1) and move the backrest
to its up most upright position (2).
1
2
• Release the shoulder and waist straps from the harness lock before
you assemble the seat unit. Place the seat unit fabrics back pocket
(3) over the seat unit's backrest.
3
• Place the shoulder straps through the holes (4a) or (4b) in the
backrest depending on the size of the child.
• Place the waist straps (5) through the holes in the seat.
• Place the crotch strap through the holes (6a) or (6b) in the base
and seat depending on the size of the child.
5
• A harness with shoulder and crotch straps contains two shoulder
pads and one larger crotch pad. Place the shoulder pads over the
two shoulder straps (7). Attach the waist harness with the lock (8).
7
Put the crotch pad over the crotch strap.
8
• Make sure that the seat fabric's back pocket is attached correctly
onto the backrest frame (9).
WARNING
• Always make sure that the backrest is in a safe position before it is
used. This step is very IMPORTANT.
Manual Cerox 2.0 v. 2.5