Transport, Packaging And Storage; Transport; Packaging; Storage - WIKA T32.1S Betriebsanleitung

5. Transport, packaging and storage

5. Transport, packaging and storage

5.1 Transport

Check instrument for any damage that may have been caused by transport. Obvious
damage must be reported immediately.

5.2 Packaging

Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).

5.3 Storage

Permissible conditions at the place of storage:
Storage temperature: -40 ... +85 °C
■
Humidity: 95 % relative humidity
■
Avoid exposure to the following factors:
Direct sunlight or proximity to hot objects
■
Mechanical vibration
■
Soot, vapour, dust and corrosive gases
■
WIKA operating instructions model T32.xS
EN
15