2. Safety
2.3 Additional safety instructions for instruments per ATEX
WARNING!
Non-observance of these instructions and their contents may result in the loss
EN
of explosion protection.
WARNING!
■
■
2.4 Special hazards
WARNING!
Observe the information given in the applicable type examination certificate
and the relevant country-specific regulations for installation and use in
hazardous areas (e.g. IEC 60079-14, NEC, CEC). Non-observance can result
in serious injury and/or damage to equipment.
For additional important safety instructions for instruments with ATEX
approval see chapter 2.3 "Additional safety instructions for instruments per
ATEX".
WARNING!
The functional galvanic isolation present in the instrument does not ensure
sufficient protection against electrical impulses in the sense of EN 61140.
WARNING!
For hazardous media such as oxygen, acetylene, flammable or toxic gases or
liquids, and refrigeration plants, compressors, etc., in addition to all standard
regulations, the appropriate existing codes or regulations must also be
followed.
WARNING!
To ensure safe working on the instrument, the operator must ensure
■
■
8
Observe the applicable regulations for the use of Ex-class instruments
Do not use transmitters with any damage to the exterior!
that suitable first-aid equipment is available and aid is provided whenever
required.
that the operating personnel are regularly instructed in all topics regarding
work safety, first aid and environmental protection and know the operating
instructions and, in particular, the safety instructions contained therein.
WIKA operating instructions model T32.xS