Jungheinrich DFG 316s Betriebsanleitung Seite 67

If the oil is hot:
– Operate the mast by completely
raising and lowering it once.
– Turn off the engine.
– Pull out the oil dipstick (53 or 54 or 55)
and wipe off with a clean cloth. Check
hydraulic oil level. The level must be
just over the MAX mark on the dipstick.
If required, add oil up to just over the
MAX mark on the dipstick.
NOTICE If the engine dies or cuts out
while raising the mast, the mast
must be lowered slowly before
the procedure may be continued.
E 24