Jungheinrich DFG 316s Betriebsanleitung Seite 13

NOTICE Failure to comply with the content of this Operating Manual shall invalidate
the warranty. The same shall apply if the customer and/or third parties repair
or modify the machine without the approval of our customer service
department.
Attachment of accessories: The attachment or installation of accessories, and
modifications and/or additions to the hardware or software, which adversely affect or
change the nominal power, the safe operation, the emergency devices, or other
functions of the industrial truck, are permissible only with the prior, express, written
approval of the manufacturer.
If such approval is granted, the nameplates, markings or warnings with regard to load
capacity, operation, and maintenance must be altered accordingly.
Local authority approval must be obtained if necessary.
Local authority approval does not, however, release the owner from his or her duty to
obtain approval from the manufacturer.
If the industrial truck is fitted with accessories, including fork extensions, the user
must ensure that the truck is labeled to identify the accessories and that the
approximate weight of the truck and the combined accessories is shown, together
with the load capacity of the truck and accessories at maximum lift with a laterally
centered load.
If the modifications are associated with alterations and repairs to the basic functions,
these changes must be made in accordance with the criteria and procedures set
down by the manufacturer.
The basic functions comprise the following elements:
– Steering (guidance)
– Travel speed
– Controller and sensors
– Lift and load influencing
C 2