Parkside PDT 40 F4 Bedienungs- Und Sicherheitshinweise Seite 10

taking the information con-
tained within the operating
instructions into account;
z Comment
An expert is someone who, due
to his/her professional training
and experience has sufficient
knowledge in the area of fas-
tening devices and is famil-
iar with the relevant national
occupational health and safety
regulations, accident preven-
tion regulations, directives and
generally accepted rules of tech-
nology (e.g. CEN or CENELEC
standards) to the extent that he/
she can assess the operational
safety of fastening devices.
Brackets to fix fastening
„
devices onto a support,
e.g. workbench, must be
designed by the manufac-
turer such that the fastening
devices can be securely fixed
for the intended purpose, e.g.
so that they cannot be dam-
aged, rotated, moved.
Special areas of application for
the fastening device may require
compliance with additional regu-
lations and rules (e.g. working in
hazardous areas (Ex)).
10 GB/IE/NI/CY/MT
z Safety instructions for the
fastening device
Read all safety
instructions and other
instructions.
Read and understand all
the safety instructions
before you connect,
disconnect, load, use or
maintain the device, replace
accessories or work near the
device. Failure to do so can
result in serious bodily injury.
Please keep all safety
instructions and other
instructions in a safe place!
Keep your fingers away from
„
the trigger when you are not
using this device and switch
from a working position to
another position.
Before starting work each
„
time, check that the safety
and trigger devices are work-
ing properly and that the
screws and nuts are all tight.
Do not carry out any alter-
„
ations to the device.
Do not dismantle or block any
„
parts of the fastening device,
such as, for example, a trig-
ger safety catch.
Do not carry out any
„
" Emergency repairs" using
inappropriate tools/methods.