SAFETY
This section contains information and important notes on the safe commissioning and handling of
the machine.
For your safety, read this manual carefully before commissioning. This will enable you
to handle the machine safely and thus prevent misunderstandings as well as
personal injury and damage to property. Pay special attention to the symbols and
pictograms used on the machine as well as the safety information and danger
warnings!
11.1
Intended use of the machine
The machine is designed exclusively for the following activities:
For sanding and notching metal pipe ends, surface polishing and sanding of workpieces of metal
or similar materials which are not hazardous to health, flammable or explosive, each within the
prescribed technical limits.
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
Technical restrictions
The machine is designed for the work under the following conditions:
Relative humidity
Temperature (operation)
Temperature (storage, transport)
Prohibited applications / Dangerous misuse
Operating the machine outdoors.
•
•
Operating the machine without adequate physical and mental fitness.
Operating the machine without knowledge of the manual.
•
Modifying the machine design.
•
•
Operating the machine in a potentially explosive environment.
The processing of flammable and explosive materials (e.g. pure aluminium, magnesium
•
etc.) without additional measures.
Operating the machine outside the technical limits specified in this manual.
•
•
Removing of the safety markings attached to the machine.
Modifying, circumventing or disabling the safety devices of the machine.
•
•
Machining of materials with dimensions outside the limits specified in this manual.
Cleaning the machine with water, neither with the power switched on nor with the power
•
switched off.
The non-intended use or the disregard of the explanations and instructions described in this
manual will result in the expiration of all warranty claims and compensation claims for damages
against HOLZMANN MASCHINEN GmbH.
HOLZMANN MASCHINEN GmbH
N O TE
www.holzmann-maschinen.at
max. 70 %
+10 °C to +40 °C
-25 °C to +55 °C
SAFETY
22
MSM100PRO_400V