eta GUSTUS IV Bedienungsanleitung Seite 40

Preparing the food
The attachments can be used for chopping, slicing, grating and scraping of almost any type
of fruits or vegetables. You can slice carrots, potatoes, cabbages, cucumbers, zucchinis,
beetroots, mushrooms, onions, etc. You can use the EC1 - EC3 grater to process fruits,
vegetables, cheese and food of similar structure. The cheese greater EC4 is designed for
processing hard cheeses and making bread crumps.
Use
Put a suitable container under the grating adapter outlet. Chop the vegetables into pieces
of the size fit for putting them inside the grating adapter feeding tube. Put the pieces into
the adapter and slightly push by the pusher. The processed food is going out from the
outlet into the provided container.
The recommended processing speed is 3 to 6.
– A small amount of food will remain on the grater after each use. This is normal
and does not establish a reason for filing a complaint.
– Cut large pieces into smaller ones so that they can be put into the hopper.
– First remove peels if processing citrus fruits.
– Input the food gradually and continuously.
– Do not chop the food too finely. Sufficiently fill the feeding tube to prevent slipping
the food away in processing.
– Set low/medium speed when processing soft food, such as cucumbers. To process
harder food, such as carrot or hard cheese, set the medium/high/maximum speed.
– Use low speed to grate soft food, otherwise it becomes mushy.
– If you are chopping hard cheese or chocolate, work for a short time, because the food
heats up, becomes softer and may get lumpy.
– Before slicing cabbage, cut it into hunks and remove the cabbage stalks.
– When slicing or grating, the pieces of the processed food will be shorter if input
vertically, not horizontally.
III.5) Glass blender (F)
Description (Fig. 9)
F1 – Container lid
F2 – Container support
F3 – Knife
– Do not use safety lock controlled by the container support for switching off the appliance!
– Do not let the blender running without any food!
– Never pour boiling liquids in the container. High temperature could damage the
container and cause breaking the glass. Always put the lid and stopper on the
container before on-switching the appliance. Never remove the container lid F1 when
the motor unit is running!
– Before removing the blender lid or container, wait until the rotating parts completely stop.
– When the blender is in the state of idle operation, e.g. the blade fails to touch the foods,
unplug the unit until the foods have been relaxed.
Tips
F4 – Knife sealing
F5 – Removable stopper
F6 – Glass container
Safety hints and tips
39 / 85
EN