Bullard DXT Benutzerhandbuch Seite 3

DO NOT USE SOLVENTS OR PAINT THINNERS TO CLEAN THE BULLARD THERMAL IMAGER AS THEY COULD PERMANENTLY MAR THE SURFACE
OR DEGRADE THE PROTECTIVE PROPERTIES OF THE CASING.
DO NOT INTENTIONALLY SUBMERGE THE UNIT UNDER WATER OR SUBJECT THE UNIT TO HIGH PRESSURE WATER.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD CAUSE DAMAGE AND RENDER THE PRODUCT UNSAFE FOR USE.
ONLY USE CHARGERS APPROVED BY BULLARD TO CHARGE THE BATTERY. DAMAGE TO THE BATTERY CAN OCCUR IF YOU USE NON-BULLARD
CHARGERS. FAILURE TO FOLLOW THIS INSTRUCTION COULD CAUSE DAMAGE AND RENDER THE PRODUCT UNSAFE FOR USE.
THE TEMPERATURE RANGE TO CHARGE THE BATTERY IS 32°F TO +113°F (0°C TO 45°C). IF YOU CHARGE THE BATTERY AT TEMPERATURES
OUTSIDE OF THIS RANGE, IT CAN CAUSE SEVERE DAMAGE TO THE BATTERY.
DO NOT CHARGE THE THERMAL IMAGER IN A HAZARDOUS LOCATION. FAILURE TO FOLLOW THIS INSTRUCTION COULD CAUSE DEATH OR
SERIOUS INJURY.
DO NOT SHORT CIRCUIT, CRUSH, INCINERATE, OR DISASSEMBLE THE THERMAL IMAGER OR BATTERY. FAILURE TO FOLLOW THIS
INSTRUCTION CAN CAUSE SEVERE DAMAGE AND RENDER THE PRODUCT UNSAFE FOR USE.
RISK OF FIRE, EXPLOSION OR BURNS IF USED IMPROPERLY.
EXPLOSION HAZARD. DO NOT CONNECT OR DISCONNECT THE EQUIPMENT (THERMAL IMAGER) TO ANY CHARGER IN A HAZARDOUS
LOCATION. FAILURE TO FOLLOW THIS INSTRUCTION COULD CAUSE DEATH OR SERIOUS INJURY.
USERS MUST VERIFY ALL CHANGES MADE ON THE CONFIGURATOR ARE ACTIVATED ON THE IMAGER PRIOR TO USE. FAILURE TO FOLLOW
THIS INSTRUCTION COULD CAUSE DEATH OR SERIOUS INJURY.
Bullard DXT
�
WARNING
�
WARNING
�
CAUTION
�
WARNING
�
WARNING
�
WARNING
�
WARNING
�
WARNING
www.bullard.com
Thermal Imager
TM
User Manual
3