Bullard DXT Benutzerhandbuch Seite 10

8. OPTIONAL FEATURES
8.1.2 Features Selection
Short press the 'A' button to move the selector (indicated by yellow corner brackets) to the next feature, the feature that is currently selected will
appear opaque. If the selector reaches the bottom of the feature list, it will automatically cycle back to the beginning on the press of the 'A' button.
Long press the 'A' button to activate the selected feature.
Transparent Icon = Feature
is available for activation.
8.1.3 Exit Features
Long press the 'A' button or tap the power button to return to standard operation.
10
7. SAFETY KICKOUT
For your safety, the imager will automatically deactivate certain features when more
than 5% of the pixels on the screen are above the threshold for colorization (typically
500° F / 260 ° C). This safety feature applies for Thermal Throttle, On-Screen Playback,
and the On-Screen Settings Menu.
If you are in a situation where more than 5% of the pixels on the screen are above the
threshold for colorization and you are not in Thermal Throttle or On-Screen Playback
those icons will appear crossed out. This means that you cannot activate the feature at this
time (see image to the left).
8.1 FEATURE ACTIVATION
8.1.1 Features Menu
Use the Features Menu to activate/deactivate certain features. Short press the 'A'
button to display the Features Menu. Once the Features Menu is activated, a series
of transparent icons will appear on the left part of the image indicating the available
features on this specific imager. If no further button press is detected in a period of 3
seconds, the menu automatically disappears.
Opaque Icon = Feature
is selected or activated.
www.bullard.com
Crossed Out Icon = Feature cannot be
activated at this time.