Werbung
Verfügbare Sprachen
Verfügbare Sprachen
triangle icon stop flashing. The individual measured values will
be shown on the top 3 rows of the display.
Note: Please note that angular error (no right angles) will lead to
incorrect results. Ensure that the measured distances lie on a plane
(alignment).
Addition (Plus)
1. To add two individual values, take a measurement (length or
area or volume) so that the display is showing a value.
2. Then press the add / subtract button
(Plus) function. Now, the plus symbol will be flashing on the
"value-3" row
3. Now take a second measurement (length or area or volume).
The second measured / calculated value will be shown on the
"value-3" row
urement, the added result will be shown on the bottom row
of the display. The first measured/calculated value will be shown
on the "value-2" row
Note:
- The addition can be carried out with all units (length, area,
volume). You can also include the measurement results of
functions such as area and volume in the addition.
- Only values of the same units can be added. The first meas-
ured / calculated value sets the unit to be used.
- Addition cannot be used with Pythagoras theorem.
52 GB/IE
of the display.
22
of the display. Right after the second meas-
22
of the display.
20
to start the Addition
7
23
Werbung
