Progress PCD46103X Benutzerinformation Seite 4

Always use oven gloves to remove or insert accessories or
•
ovenware.
Use only the food sensor (core temperature sensor)
•
recommended for this appliance.
To remove the shelf supports first pull the front of the shelf
•
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers
•
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions supplied
with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
• Do not pull the appliance by the handle.
• Install the appliance in a safe and suitable
place that meets installation requirements.
• Keep the minimum distance from other
appliances and units.
• Before mounting the appliance, check if
the appliance door opens without restraint.
If not the appliance has to be lifted.
• The appliance is equipped with an electric
cooling system. It must be operated with
the electric power supply.
• The built-in unit must meet the stability
requirements of DIN 68930.
Cabinet minimum height
(Cabinet under the work‐
top minimum height)
Cabinet width
4 ENGLISH
444 (460) mm
560 mm
Cabinet depth
Height of the front of the
appliance
Height of the back of the
appliance
Width of the front of the
appliance
Width of the back of the
appliance
Depth of the appliance
Built in depth of the ap‐
pliance
Depth with open door
Ventilation opening mini‐
mum size. Opening
placed on the bottom
rear side
Mains supply cable
length. Cable is placed
in the right corner of the
back side
Mounting screws
550 (550) mm
455 mm
440 mm
595 mm
559 mm
567 mm
546 mm
882 mm
560x20 mm
1500 mm
3.5x25 mm