Progress PCD46103X Benutzerinformation Seite 13

To turn on the appliance with necessa‐
ry settings with only one press of the
Set +
sensor field any time later.
Go
To set a countdown time. This function
has no effect on the operation of the
Minute
appliance. You can set the Minute
Minder
Minder at any time and also when the
appliance is off.
00:00
To set the count up, which shows how
long the appliance works. It is on im‐
mediately when the appliance starts to
Count
heat. The Count Up Timer is not
Up
turned on if Duration and End Time are
Timer
set. This function has no effect on the
operation of the appliance.
7.2 How to set: Time of Day
After the first connection to the mains, wait
until the display shows
flashes.
1. Press or
2. Press .
3. Press or
4. Press .
The display shows the new time.
To change the time of day press
and again until starts to flash.
7.3 How to set: Duration
1. Set a heating function and temperature.
2. Press again and again until
to flash.
3. Press or
Duration.
4. Press or the Duration starts
automatically after 5 seconds.
5. Press or
Duration.
6. Press or the Duration starts
automatically after 5 seconds.
When the set time ends, the signal sounds for
2 minutes. The display shows flashing
time setting. The oven turns off.
and 12:00. "12"
to set the hours.
to set the minutes.
again
starts
to set the minutes for
to set the hours for
7. Press a sensor field to stop the signal.
8. Turn off the oven.
7.4 How to set: End Time
1. Set a heating function and temperature.
2. Press
to flash.
3. Press
press
then the hours.
When the set time ends, the signal sounds for
2 minutes. The display shows flashing
the time setting . The oven turns off
automatically.
4. Press a sensor field to stop the signal.
5. Turn off the oven.
7.5 How to set: Time Delay
1. Set a heating function and temperature.
2. Press
to flash.
3. Press
Duration.
4. Press
5. Press
Duration.
6. Press
The display shows flashing
7. Press
press
then the hours.
The oven turns on automatically later on,
works for the set Durationand stops at the set
End Time. When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing and the time setting . The oven
turns off automatically.
8. Press a sensor field to stop the signal.
9. Turn off the oven.
When the Time Delay function is
turned on, the display shows a symbol of
the heating function,
. The dot shows which clock function is
and
on in the Clock / residual heat display.
again and again until
or to set the End Time and
. First you set the minutes and
again and again until
or to setthe minutes for
.
or to set the hours for
.
.
or to set the End Time and
. First you set the minutes and
with a dot and
ENGLISH
starts
and
starts
13