Condenser - Leica LMD6500 Bedienungsanleitung

6. Description and assembly of the components
• Place the specimen holder (fi g. 8) onto the
stage .
Fig. 8 Removable specimen holder
a 3-fold holder for scanning stage
b holder for motor stage
a
b
Fig. 9 Condenser holder
1 Guiding notch
18
1
6.2

Condenser

You can use either a motorized or a manual con-
denser. Both are equipped with condenser head
S28.
• Screw the condenser head into the condenser.
• Using the condenser height adjuster (10.4),
turn the condenser holder (10.1) completely
downwards.
• Unscrew the clamping screw for the conden-
ser (10.3) far enough so that the condenser can
be inserted from the front.
• From the front, insert the condenser into the
condenser holder as far as it will go. On the
underside of the condenser, there is an orien-
tation pin, which must be located in the guiding
notch (9.1).
• Pull the condenser's clamping screw (10.3) so
that the condenser is locked in place.
• Connect the motorized condenser by connec-
ting the condenser cable (4.3) with the stand.
Fig. 10 Condenser holder
1 Condenser holder
2 Condenser centering
3 Clamping screw for condenser
4 Condenser height adjuster
1
2 3 4