Laser
For indoor use only.
FTSS355-50 LASER SYSTEM
Supply voltage:
Frequency:
Power consumption:
Ambient temperature:
Explorer 349 LASER SYSTEM
Supply voltage:
Frequency:
Power consumption:
Ambient temperature:
Attention!
The mains plug may only be inserted into a
grounded socket.
Any extension cable used must be similarly
grounded. Any break in the ground conductor
inside or outside the instrument or loosening
of the ground conductor connection can ren-
der the unit dangerous. Intentional severance
is forbidden.
. Attention!
Using the ground connection, any acces-
sories connected to the microscope which
have their own and/or a different power sup-
ply can be given the same ground conductor
potential. Please consult our servicing per-
sonnel if you intend to connect units without
a ground conductor.
90-265 V AC
50-80 Hz
< 100 W
20°-40°C
100-240 V AC
< 5kHz
< 75 W
10°-35°C
Attention!
Only fuses of the specifi ed type and rating
may be used. Never bridge the fuse holders.
Attention!
The electric accessories of the microscope
are not waterproof. If water gets inside them,
it may cause electrical shock.
Do not put the microscope and its acces-
sories too near a water supply or anywhere
else where water may get inside them.
Attention!
Before changing fuses or lamps, always
turn the mains switch off and disconnect the
mains cable.
Attention!
Protect the microscope from major tempera-
ture fl uctuations. These may lead to conden-
sation which can damage the electric and
optical components.
3. Safety notes
11