Blackmagic Design Pocket Cinema Camera 6K Pro Installations- Und Bedienungsanleitung Seite 77

NOTE When selecting the 3.5mm input as an audio source, the channel 1 and channel
2 source both need to be line level or mic level. This means that if you select
'3.5mm left - line' as your channel 1 source, the available options for the 3.5mm input
on channel 2 will all be line level: '3.5mm left - line', '3.5mm right - line' and
'3.5mm mono - line'. The mic level options will be grayed out.
Channel 1/2 Level
The level meters help you set the correct audio level.
Channel 1/2 Gain
Use these sliders to adjust the recording levels of your chosen channel 1 and 2 sources.
Audio Settings 2
The second page of the 'audio' tab contains the following settings.
Headphones Volume
This slider adjusts the output levels for headphones attached to the 3.5mm headphone jack.
Move the audio slider left or right to adjust levels.
Speaker Volume
This slider adjusts the output levels for the built in speaker. Move the audio slider left or right to
adjust levels.
XLR Phantom Power
Your camera's XLR input can provide 48V phantom power so you can use microphones that
aren't self powered. When your camera is set to 'XLR' audio input, simply tap the 'phantom
power' switch icon to enable phantom power. Pocket Cinema Camera 6K Pro has two XLR
inputs and separate phantom power switches for each input.
Audio Meters
Select an 'audio meters' standard for the peak level meters.
Audio meter setting
PPM (-20 dBFS)
PPM (-18 dBFS)
Standard
SMPTE RP.0155
EBU R.68
Settings 77