Blackmagic Design Pocket Cinema Camera 6K Pro Installations- Und Bedienungsanleitung Seite 72

‚ CAM
Displays the camera index as set in your camera's slate. For more information,
see the 'slate' section.
‚ OPERATOR
Identifies the camera operator as set in your camera's slate. For more information,
see the 'slate' section.
‚ DURATION DISPLAY
Displays the duration of the current clip while recording, or the last recorded clip
in the following format: hours:minutes:seconds.
‚ REEL, SCENE, TAKE
Displays the current reel, scene and take. For more information on reels, scenes,
takes and their labelling conventions, refer to the 'slate' section.
‚ DYNAMIC RANGE
The bottom left hand corner of the monitor displays the currently applied LUT, if applied
to that output. If no LUT is applied, 'film' or 'video' dynamic range is displayed.
‚ TIMECODE
The bottom right of the monitor displays your camera's timecode, in the
following format:
hours:minutes:seconds:frames.
Viewfinder Settings
If you have Blackmagic Pocket Cinema Camera Pro EVF installed on your camera, the second
page of the 'monitor' tab includes some additional settings to select what is displayed on the
viewfinder. The 'all' button refers to settings for the LCD, HDMI output and viewfinder at the
same time.
Page 2 of the 'monitor' tab on Pocket Cinema Camera 6K Pro
with settings for the viewfinder
Status Text
This setting can be useful to hide the status text and meters on the viewfinder, leaving only the
information necessary to compose or direct a shot. Tap the 'status text' switch to toggle the
appearance of status text and meters on the viewfinder. Overlays such as frame guides, grids,
focus assist and zebra remain visible, if enabled.
Display
Your viewfinder can display audio meters, codec and resolution information. Tap 'meters'
or 'codec and resolution' in the 'viewfinder' menu to select your preferred view.
Settings 72