Herunterladen Inhalt Inhalt Diese Seite drucken

Torqeedo Cruise 10.0 R Originalbetriebsanleitung Seite 92

Vorschau ausblenden Andere Handbücher für Cruise 10.0 R:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DE
EN
AD VIC E
Do not switch off the system during calibration.
Depending on the size of the battery bank, very long running times may re-
sult.
If you wish to track the voltage level of the battery bank during the calibra-
tion trip, you can use the multifunction display to show the voltage.
Proceed as follows:
1. Charge the battery until it is 100% full.
2. Briefly press the CAL button twice.
The charge state is set to 100% on the on-board computer.
3. Start the calibration trip.
4. During the calibration trip, ensure that the battery is sufficiently charged, so that
you can return to the berth or landing stage at any time.
5. Attach the boat to the landing stage or berth.
6. At the landing stage or berth, run the battery until it is empty.
During the last half hour of the calibration trip, the motor's power consumption
must be between 50 and 400 Watt.
The motor switched itself off automatically, and this completes the calibration.
page 92 / 106
Care and service

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis