Mounting / Dismounting, Operating Position - Stahl EXLUX 6401-Serie Betriebsanleitung

7.2

Mounting / dismounting, operating position

Explosion hazard due to electrostatic discharge
Non-complicance results in severe or fatal injuries.
Do not use the luminaire in strong charge generating environments!
The following processes/activities should be avoided:
• accidental friction
• particle currents
The luminaire is suitable for wall and ceiling mounting.
In event of wall mounting in outdoor areas, avoid installation with central lock
at top.
The mounting position with upward light emission in outdoor areas is
prohibited.
For outdoor use, we recommend to install a 8162/1 breather from
R. STAHL Schaltgeräte GmbH.
The breather guarantees compliance with degree of protection IP64 in all
mounting positions.
Explosion hazard due to inadmissible heating!
Non-compliance results in severe or fatal injuries.
• Avoid external heat sources and/or direct sunlight (risk of change of
• Do not exceed the maximum ambient temperature due to external heat
Suspension at fixed mounting points
L2
254914 / 640160300040
2017-12-01·BA00·III·en·02
temperature class or change of maximum permissible surface
temperature).
sources (premature failure of equipment).
Version
17/18 W 400
32/36 W 800
40/58 W
max. screw-in depth 10 mm
15446E00
Ätna Zone II
PPW EX 34../..
Mounting and installation
DANGER
DANGER
L2 [mm]
Linear Luminaire for Fluorescent Lamps
Series EXLUX 6401
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
13